|
 SC
Swing Couplings
OETIKER Swing
Couplings allow unrestricted full flow with safe, quick connection and
disconnection under pressure. This unique design provides superior sealing,
ease of operation and long service life.
OETIKER Swing
Couplings interchange with most common plug systems, providing a universal
and flexible connection. The quality and reliability of the products have
been officially certified.
OETIKER
Quality Features
Materials
OETIKER Swing Couplings are manufactured from select grades of ferrous
and non-ferrous materials. Additional special surface treatment on housings
and cylinders guarantee durability with little wear and tear, and high
corrosion resistance. The orange coloring on the release sleeve signifies
safety - the plastic coating affords increased grip and can also prevent
damage to work pieces.
Seals
OETIKER Swing Couplings are fitted with Nitrile elastomer seals NBR as
standard. Optional FPM, EPDM or FFKM seals are available on request. Every
OETIKER Swing Coupling is leakage tested.
Lubricants
OETIKER Swing Couplings are treated with high quality lubricant before
they leave the factory. Special lubricants are available for specific
applications.
Safely connected and disconnected under pressure
Features
• In accordance with ISO 6150, Safety Standard ISO 4414 and MILC
4109
• Wide range of interchangeability
• Full flow, negligible loss of pressure
• Easy to operate, easy to clean
• Compact design with few individual parts
• Ergonomic design, quality engineered suitable for vacuum
• Connect and disconnect safely - under pressure
• Simultaneous venting reduces the dangerous whiplash effect
• Partly covered with plastic coating for protection
Applications
• Compressed air supply for pneumatic tools and automation equipment.
• Supply lines carrying low viscosity fluids and gases.
Pressure
Maximum pressure rating of 25 bar/360 psi up to approximately 100 mbar
vacuum.
Temperature
Standard model from -20° to +100°C (-4° to +212°F). Higher
temperatures possible according to media with the use of special FPM,
EPDM or FFKM seals.
Chemical
Resistance
In the case of chemically aggressive media, the material for the housing
and seals must be agreed with us - or the customer's own tests should
be carried out before a decision as to the material is reached.
Note
Use only on supply lines up to 25 bar (360 PSI). For safety, do not exceed
pressure limitation of the hose and/or operated device. If plugs with
barbed stem are used, make sure barb size matches inside diameter of the
hose. All fittings/plugs must be secured to the hose with a hose clamp,
preferably and OETIKER Clamp.
Connect
• Insert plug fully into coupling housing angled position
• Swing plug with hose attached to straight position
Disconnect
• Manually retract release sleeve
• Swing plug into angled position and separate from coupling
Call
today to find out why Specialty Hose Corporation is "the source
for solutions."
HOSE
• EXPANSION JOINTS • COMPRESSED
GAS
FITTINGS & ACCESSORIES • CONTACT
US • HOME
|
